National Hotline: 400-0030091 C2TES1 Flexible Large-Format Tile Adhesive
C2TES1 C2TES1 Flexible Large-Format Tile Adhesive
Home/Products/Auxiliary Materials

Interior Ultra-White Putty ZG009

An ultra-white interior finishing putty for a smooth, paint-ready surface with high whiteness and easy sanding.

Auxiliary Materials Price on Request Shelf life 12 months

Interior Ultra-White Putty ZG009

An ultra-white interior finishing putty for a smooth, paint-ready surface with high whiteness and easy sanding.

Request a Quote All Products

Description

A wall leveling material made from natural mineral powder, imported rubber powder, anti-crack fibers and eco-friendly polymers — excellent water resistance, weather resistance and crack resistance, with good stress tolerance to substrate expansion

Applications

  1. Fine leveling of interior walls requiring water and weather resistance
  2. Fine leveling of interior walls: cement mortar, concrete, gypsum board, etc.
  3. For interior walls prone to expansion and shrinkage deformation

Product Advantages

  1. Selected natural mineral powder — fine, white, smooth and easy to apply
  2. High bond strength; moisture-proof, anti-mold, waterproof, anti-peeling, anti-aging, alkali-resistant, crack-resistant, weather-resistant
  3. Excellent water resistance — no peeling, cracking or blistering after 48h immersion

Technical Standards

  1. Standard: JG/T 298-2010 "Putty for Interior Walls"
  2. Application conditions: 5-35°C, relative humidity ≤ 80%
  3. Curing: Keep doors and windows closed for 12+ hours until fully cured
  4. Water-to-powder ratio: 4-5 L / 10 kg
  5. Coverage: approx. 0.7-1.5 kg/m² at 1-3 mm thickness (depending on wall flatness)

How to Use

  1. Substrate Preparation
  2. (1) Inspect and clean the wall — flat, firm, dry, free of oil, dust and standing water
  3. (2) Smooth or loose surfaces (concrete, smooth walls, gypsum board) require sealing with a bonding agent
  4. (3) This is a water-resistant putty — prevents mold and peeling on damp walls, but is not itself a waterproofing product
  5. Mixing Method
  6. (1) Clean the mixing bucket and electric mixer — no residue of other materials
  7. (2) Add water first, then the product. Never add any material other than clean water
  8. (3) Mix until a uniform, lump-free paste forms; rest for a few minutes, then mix again before use
  9. (4) Use mixed paste within 2 hours; never re-mix hardened paste with water
  10. Application Method
  11. (1) Two coats recommended, approx. 1-1.5 mm each; apply the second coat only after the first is fully dry
  12. (2) Proceed to the next step only after each coat is fully dry

Precautions

  1. Read instructions carefully before use; improper handling may affect performance
  2. Not edible. Avoid inhalation. Keep away from pets and children
  3. Wear protective equipment if you have sensitive skin. In case of eye contact, rinse with plenty of water and seek medical attention
  4. Seal and store unused product properly; use as soon as possible

Transport & Storage

  1. Keep away from water and sunlight during transport; cover with tarpaulin if necessary
  2. Store in a dry, ventilated place away from direct sunlight
  3. Shelf life: 12 months when properly stored
Related Products

Often specified together.