National Hotline: 400-0030091 C2TES1 Flexible Large-Format Tile Adhesive
C2TES1 C2TES1 Flexible Large-Format Tile Adhesive
Home/Products/Auxiliary Materials

Joint Filling Gypsum

A fast-setting gypsum compound for filling and reinforcing drywall joints before decoration.

Auxiliary Materials Price on Request Shelf life 12 months

Joint Filling Gypsum

A fast-setting gypsum compound for filling and reinforcing drywall joints before decoration.

Request a Quote All Products

Description

A convenient wall repair material made from fine hemihydrate gypsum and eco-friendly modifiers — for filling, repairing and leveling interior walls, gypsum boards, cement boards, nail holes, and corner work

Applications

  1. Filling, repairing and leveling of interior walls, gypsum boards, cement boards and nail holes
  2. For interior wall corners and edges

Product Advantages

  1. High strength, strong adhesion; high flexibility, low shrinkage, excellent crack resistance
  2. Good workability, easy to apply
  3. Scientifically proportioned — anti-corrosion, no discoloration, mold or odor
  4. Certified by China Environmental Label, French A+ and other strict eco-certifications

How to Use

  1. Substrate Preparation
  2. (1) Inspect and clean the wall — firm, dry, free of oil, dust and standing water
  3. (2) At corners, ensure no screws protrude above the gypsum board; apply anti-rust treatment
  4. (3) For highly absorbent substrates (e.g. non-paper-faced gypsum board), apply bonding agent or dampen first
  5. Mixing Method
  6. (1) Clean the mixing bucket and electric mixer — no residue of other materials
  7. (2) Add water first, then the product. Never add any material other than clean water
  8. (3) Mix until a uniform, lump-free paste forms; rest for 5 minutes, then mix again before use
  9. (4) Use mixed paste within 1 hour; never re-mix hardened paste with water
  10. Application Method
  11. (1) Apply a 5-10 cm wide layer of paste on both sides of the joint as the base coat
  12. (2) Immediately press joint tape into the base paste, squeeze out air bubbles, and cover with a wider layer
  13. (3) After the base paste cures, apply one or two wider coats of joint compound
  14. (4) Sand with sandpaper only after the final coat has hardened and fully cured

Precautions

  1. Different water-powder ratios will change mixing and setting time
  2. Read instructions carefully before use; improper handling may affect performance
  3. Not edible. Avoid inhalation. Keep away from pets and children
  4. Wear protective equipment if you have sensitive skin. In case of eye contact, rinse with plenty of water and seek medical attention
  5. Seal and store unused product properly; use as soon as possible

Transport & Storage

  1. Keep away from water and sunlight during transport; cover with tarpaulin if necessary
  2. Store in a dry, ventilated place away from direct sunlight
  3. Shelf life: 6 months; can still be used after 6 months if unaffected by moisture
Related Products

Often specified together.