National Hotline: 400-0030091 C2TES1 Flexible Large-Format Tile Adhesive
C2TES1 C2TES1 Flexible Large-Format Tile Adhesive
Home/Products/Waterproofing

K11 Colored Waterproof Coating

The K11 membrane with an integral colour indicator, so coverage on every square metre can be verified by eye.

Waterproofing Price on Request Shelf life 12 months

K11 Colored Waterproof Coating

The K11 membrane with an integral colour indicator, so coverage on every square metre can be verified by eye.

Request a Quote All Products

Applications

Suitable for waterproofing in kitchens, bathrooms, warehouses, basements, etc.

Product Features:

Complies with National Standard

Strong impermeability — no water penetration

Nano-crystalline dense sealing forms a 3D high-strength waterproof layer

Colorful glossy paste ensures full coverage with no missed spots

Good flexibility — bridges cracks up to 1 mm; strong adhesion to mortar forms a tight, firm bond

Usage Specifications:

Substrate preparation: Clean the substrate thoroughly — it must be flat, firm and hollow-free. Fill pores and pinholes with cement mortar; repair internal corners and pipe roots into oval shapes. In high temperatures or on dry substrates, dampen thoroughly with clean water until no standing water remains.

Mixing: Pour the liquid into a clean bucket, then slowly add powder while stirring (liquid : powder = 1 : 2-2.5). Mix thoroughly until a uniform, lump-free paste with no sediment forms. Rest for a few minutes, stir lightly again, then use. (Electric mixer recommended for best results)

Application: Apply directly to the prepared substrate with a brush or roller — no missed spots. If air holes appear, brush repeatedly to release air. After the first coat is surface-dry (not tacky), apply a second coat crosswise. Repeat at least 2-3 coats, each no more than 1 mm thick, to avoid unnecessary waste.

Curing: 8 hours after application, mist with water to cure. Conduct the water ponding test after at least 24 hours (delay if cold or poorly ventilated).

Special Notes:

Store out of reach of children. Do not swallow

Avoid eye contact. If splashed, rinse with clean water immediately; seek medical attention if discomfort persists

Tool cleaning: hardened paste is difficult to remove — wash tools with water immediately after use

Do not apply below 5°C, on wet surfaces or in rain. Use mixed paste within 2 hours; never re-mix with water after timeout

In humid or poorly ventilated areas, use ventilation equipment to speed curing. If tiles will be applied, use water-based tile adhesive to reduce hollowing or detachment.

Packaging / Storage

Store at 5-35°C in a cool, ventilated place; unopened shelf life: 12 months

Related Products

Often specified together.