A two-component polymer-modified cementitious membrane forming a seamless, permanently flexible waterproof layer.
Request a Quote All ProductsSuitable for waterproofing in kitchens, bathrooms, warehouses, basements, etc.
Product Features:
Complies with National Standard
Strong impermeability — no water penetration
Nano-crystalline dense sealing forms a 3D high-strength waterproof layer
Colorful glossy paste ensures full coverage with no missed spots
Good flexibility — bridges cracks up to 1 mm; strong adhesion to mortar forms a tight, firm bond
Usage Specifications:
Substrate preparation: Clean the substrate thoroughly — it must be flat, firm and hollow-free. Fill pores and pinholes with cement mortar; repair internal corners and pipe roots into oval shapes. In high temperatures or on dry substrates, dampen thoroughly with clean water until no standing water remains.
Mixing: Pour the liquid into a clean bucket, then slowly add powder while stirring (liquid : powder = 1 : 2-2.5). Mix thoroughly until a uniform, lump-free paste with no sediment forms. Rest for a few minutes, stir lightly again, then use. (Electric mixer recommended for best results)
Application: Apply directly to the prepared substrate with a brush or roller — no missed spots. If air holes appear, brush repeatedly to release air. After the first coat is surface-dry (not tacky), apply a second coat crosswise. Repeat at least 2-3 coats, each no more than 1 mm thick, to avoid unnecessary waste.
Curing: 8 hours after application, mist with water to cure. Conduct the water ponding test after at least 24 hours (delay if cold or poorly ventilated).
Special Notes:
Store out of reach of children. Do not swallow
Avoid eye contact. If splashed, rinse with clean water immediately; seek medical attention if discomfort persists
Tool cleaning: hardened paste is difficult to remove — wash tools with water immediately after use
Do not apply below 5°C, on wet surfaces or in rain. Use mixed paste within 2 hours; never re-mix with water after timeout
In humid or poorly ventilated areas, use ventilation equipment to speed curing. If tiles will be applied, use water-based tile adhesive to reduce hollowing or detachment.
Packaging / Storage
Store at 5-35°C in a cool, ventilated place; unopened shelf life: 12 months